#
[dir]
INPUT_BASE = INPUT_BASE_template
OUTPUT_BASE = OUTPUT_BASE_template
MET_INSTALL_DIR = METBASE_template
#
#  CONFIGURATION
#
[config]

# Looping by times: steps through each 'task' in the PROCESS_LIST for each
# defined time, and repeats until all times have been evaluated.
LOOP_ORDER = processes

# 'Tasks' to be run
PROCESS_LIST = TCPairs

LOOP_BY = INIT


# The init time begin and end times, increment, and last init hour.
INIT_TIME_FMT = %Y%m%d%H
INIT_BEG = INIT_BEG_template
INIT_END = INIT_END_template

# This is the step-size. Increment in seconds from the begin time to the end time
# set to 6 hours = 21600 seconds
INIT_INCREMENT = 21600

#
# Run MET tc_pairs by indicating the top-level directories for the A-deck and B-deck files. Set to 'yes' to
# run using top-level directories, 'no' if you want to run tc_pairs on files paired by the wrapper.
TC_PAIRS_READ_ALL_FILES = no


#
# MET TC-Pairs
#
# List of models to be used (white space or comma separated) eg: DSHP, LGEM, HWRF
# If no models are listed, then process all models in the input file(s).
#MODEL = MODELLIST_template

# List of storm ids of interest (space or comma separated) e.g.: AL112012, AL122012
# If no storm ids are listed, then process all storm ids in the input file(s).
#TC_PAIRS_STORM_ID = AL092022

# Basins (of origin/region).  Indicate with space or comma-separated list of regions, eg. AL: for North Atlantic,
# WP: Western North Pacific, CP: Central North Pacific, SH: Southern Hemisphere, IO: North Indian Ocean, LS: Southern
# Hemisphere
TC_PAIRS_BASIN = TC_PAIRS_BASIN_template

# Cyclone, a space or comma-separated list of cyclone numbers. If left empty, all cyclones will be used.
TC_PAIRS_CYCLONE = TC_PAIRS_CYCLONE_template

#TC-pair consensus
TC_PAIRS_CONSENSUS1_NAME = MD01
TC_PAIRS_CONSENSUS1_MEMBERS = AP01,AP02,AP03,AP04,AP05,AP06,AP07,AP08,AP09,AP10,AP11,AP12,AP13,AP14,AP15,AP16,AP17,AP18,AP19,AP20,AP21,AP22,AP23,AP24,AP25,AP26,AP27,AP28,AP29,AP30 
TC_PAIRS_CONSENSUS1_REQUIRED = false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false
TC_PAIRS_CONSENSUS1_MIN_REQ = 12 
TC_PAIRS_CONSENSUS1_WRITE_MEMBERS = FALSE

TC_PAIRS_CONSENSUS2_NAME = MD02
TC_PAIRS_CONSENSUS2_MEMBERS = EP01,EP02,EP03,EP04,EP05,EP06,EP07,EP08,EP09,EP10,EP11,EP12,EP13,EP14,EP15,EP16,EP17,EP18,EP19,EP20,EP21,EP22,EP23,EP24,EP25,EN01,EN02,EN03,EN04,EN05,EN06,EN07,EN08,EN09,EN10,EN11,EN12,EN13,EN14,EN15,EN16,EN17,EN18,EN19,EN20,EN21,EN22,EN23,EN24,EN25
TC_PAIRS_CONSENSUS2_REQUIRED = false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false
TC_PAIRS_CONSENSUS2_MIN_REQ = 20
TC_PAIRS_CONSENSUS2_WRITE_MEMBERS = FALSE

TC_PAIRS_CONSENSUS3_NAME = MD03
TC_PAIRS_CONSENSUS3_MEMBERS = CP01,CP02,CP03,CP04,CP05,CP06,CP07,CP08,CP09,CP10,CP11,CP12,CP13,CP14,CP15,CP16,CP17,CP18,CP19,CP20
TC_PAIRS_CONSENSUS3_REQUIRED = false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false,false
TC_PAIRS_CONSENSUS3_MIN_REQ = 8
TC_PAIRS_CONSENSUS3_WRITE_MEMBERS = FALSE

# DLAND file, the full path of the file that contains the gridded representation of the
# minimum distance from land.
TC_PAIRS_DLAND_FILE = MET_BASE/tc_data/dland_global_tenth_degree.nc

# setting this so that when verifying against analysis track, the union of points are written
TC_PAIRS_MET_CONFIG_OVERRIDES = match_points = TRUE;

#// Specify if the code should check for duplicate ATCF lines
TC_PAIRS_CHECK_DUP = true

#// Specify special processing to be performed for interpolated models.
#// Set to NONE, FILL, or REPLACE.
TC_PAIRS_INTERP12 = none 

#
#  DIRECTORIES
#
# Location of input track data directory
# for ADECK and BDECK data

TC_PAIRS_ADECK_INPUT_DIR = {INPUT_BASE}
TC_PAIRS_BDECK_INPUT_DIR = {INPUT_BASE}
TC_PAIRS_ADECK_TEMPLATE = a{basin}{cyclone}{init?fmt=%Y}.dat
TC_PAIRS_BDECK_TEMPLATE = b{basin}{cyclone}{init?fmt=%Y}.dat
#TC_PAIRS_ADECK_TEMPLATE = track.{init?fmt=%Y%m%d%H}.dat
#TC_PAIRS_BDECK_TEMPLATE = b{basin?fmt=%s}{cyclone?fmt=%s}{date?fmt=%Y}.dat

TC_PAIRS_OUTPUT_DIR = {OUTPUT_BASE}/tc_pairs
TC_PAIRS_OUTPUT_TEMPLATE = tc_pairs.{basin}{cyclone}{init?fmt=%Y}